Design and Parametric Analysis of a Stand-Alone Solar-Hydro Power Plant with Pumped Water Storage Technology

Lemene B. Deele, Simeon Ozuomba, Nseobong Okpura

Abstract


There is a global over reliance on fossil fuel for energy generation which has triggered global alarm on climate change due to greenhouse gases emitted by fossil fuel. These harmful effects of fossil fuel on the environment have tilted global effort towards harnessing renewable energy sources which is obviously the future of energy. In this paper, the design and parametric analysis of a stand-alone solar-hydro power plant using pumped water storage technology is presented. It is aimed at addressing the growing concern of bulk energy generated from renewable energy sources. The paper adopted the University of Uyo main campus as its case study site, performed a load demand profile assessment on a section of the campus, obtained the meteorological data of the site, and designed a 250 kVA solar-hydro power plant with pumped storage technology. The results of the Matrix laboratory (MATLAB) simulation revealed that when the generating head of the upper reservoir was increased from 20 m to 100 m, the required generating flow rate decreased from 1.0994 m3/s to 0.2199 m3/s. It also revealed that, an increase in the pipe diameter from 0.2 m to 1 m, decreased the equivalent head losses from 337.04 m to 0.0878 m.

Keywords: Pumped storage hydropower, bulk energy storage, renewable energy, stand-alone, green battery.


Full Text:

PDF

References


Ajayi, O. O., Ohijeagbon, O.D., Nwadialo, C. E. & Olumide, O. (2014). New model to estimate daily global solar radiation over Nigeria. Sustainable Energy Technologies and Assessments, 5, 28 - 36.

Andaroodi, M. (2006). Standardization of civil engineering works of small high-head hydropower plants and development of an optimization tool. (Masters dissertation, EcolePolytechniqueFédérale de Lausanne, Switzerland). Retrieved from https://www.researchgate.net/publication/37455777_Standardization_of_civil_engineering_works_of_small_high-head_hydropower_plants_and_development_of_an_ optimization_ tool

Babatunde, E. B. (2007). Solar energy, a friendly renewable energy option for Nigeria. Public Lecture Series of Covenant University, Nigeria.

Barbour, E., Wilson, I. A. G., Radcliffe, J., Ding, Y. & Li, Y. (2016). A review of pumped hydro energy storage development in significant international electricity markets. Renewable and Sustainable Energy Reviews, 61, 421 - 432.

Dumkhana, L. & Idoniboyeobu, D. C. (2018). Solar PV/battery system analysis for faculty of engineering building, Rivers State University, Port Harcourt, Nigeria. IOSR Journal of Electrical and Electronics Engineering, 13(1), 45 - 51.

Edozien, L. (2016). The Nigerian power sector investment opportunities and guidelines. A report submitted to the Federal Ministry of Works, Power and Housing. Retrieved from https://www.nigeriaelectricityhub.com/download/the-nigerian-power-sector-investment-opportunities-and-guidelines-draft-2016/

Ekoh, S., Unsal, I. & Maheri, A. (2016). Optimal sizing of wind-PV-pumped hydro energy storage systems. 2016 4th International Symposium on Environmental Friendly Energies and Applications (EFEA), Belgrade,Serbia. Retrieved from https://www.researchgate.net/publication/311250102_Optimal_sizing_of_wind-PV-pumped_hydro_energy_storage_systems

Ikponmwosa, O., Olawale, S., Adedayo, B. A., Dickson, E. & Kenechi, A. V. (2014). Solar energy potential and its development for sustainable energy generation in Nigeria: a road map to achieving this feat. International Journal for Engineering and Management Science, 5(2), 61 - 67.

Ilupeju, S. A. O. & Inambao, F. L. (2017). Maximising power generation in a small hydropower system using pumped storage technology. Proceedings of the World Congress on Engineering 2017 Vol II WCE 2017, July 5-7, 2017, London, United Kingdom.

Ilupeju, S. A. O. (2015). Design, modelling and optimisation of an isolated small hydropower plant using pumped storage hydropower and control techniques. (Doctoral Thesis, University of KwaZulu-Natal, Durban, South Africa). Retrieved from https://pdfs.semanticscholar.org/77bb/8f4557b7fc5e85344eb99073fc7fa98bf5b0.pdf

Notton, G., Lazarov, V. & Stoyanov L. (2011). Analysis of pumped hydroelectric storage for a wind/pv system for grid integration. Екологичноинженерство и опазваненаоколнатасреда, 1, 64 - 74. Retrieved from https://pdfs.semanticscholar.org/98ee/b2a85875252e24cf9f49bb751b3a21cbe744.pdf

Ohiero, P. O., Odey, P O. & Ukang, J. U. (2018). Design and evaluation of solar–pumped storage hybrid power system for rural communities in Nigeria. International Research Journal of Engineering and Technology, 5(7), 2263-2269.

Orhorhoro, E. K., Orhorhoro, O.W. & Ikpe, A.E (2016). A Study of solar energy potential in Sapele, Nigeria. International Journal of Thermal & Environmental Engineering, 13(2), 129 - 133.

Suleiman, L. N., (2010). Renewable energy as a solution to Nigerian energy crisis (Doctoral dissertation, Vaasan University of Applied Sciences, Finland). Retrieved from https://www.theseus.fi/bitstream/handle/10024/15198/final%20thesis.pdf?sequence=1

U.S. Department of Energy. (2006). Energy tips pumping systems: pumping systems tip sheet no 8. industrial technologies program. Retrieved fromhttps://www.energy.gov/sites/prod/files/2014/05/f16/optimize_parallel_pumping.pdf.

World Energy Council (2016). World energy resources 2016. A report compiled by world energy committee on world energy resources. Retrieved from https://www.worldenergy.org/assets/images/imported/2016/10/World-Energy-Resources-Full-report-2016.10.03.pdf

Yohannes, F. B. (2018). Feasibility study of wind and solar powered pumped hydro energy storage system for isolated grid application in Amhara Region. International Journal of Applied Engineering Research, 13(5), 2604 - 2613.


Refbacks

  • There are currently no refbacks.


International Journal of Engineering & Technology is licensed under a Creative Commons Attribution 4.0 International License Based on a work at http://www.ijet.ielas.org

Copyright © 2016-2022 International Journal of Engineering & Technology (IJET)

ISSN (online) 2545-417X

Disclaimer: Articles on International Journal of Engineering & Technology (IJET) have been previewed and authenticated by the Authors before sending for the publication. The Journal, Chief Editor and the editorial board are not entitled or liable to either justify or responsible for inaccurate and misleading data if any. It is the sole responsibility of the Author concerned.